EasySolar-II 48/3000/35-32 MPPT 250/70 GX

The Victron Energy EasySolar-II 48/3000/35-32 MPPT 250/70 GX combines a MultiPlus-II inverter/charger, SmartSolar MPPT charge controller and GX monitoring device inside one prewired enclosure. This integrated design reduces external wiring and simplifies the installation of a complete 48V solar, battery and AC power system.

The inverter provides 3000VA of apparent power and 2400W of continuous real power at 77°F, while the integrated AC charger supplies up to 35A to the battery bank. Its SmartSolar MPPT 250/70 charge controller supports up to 4000W of solar power on a 48V system and PV arrays with an open-circuit voltage of up to 250V DC.

The built-in GX device provides centralized monitoring and control through its display, Wi-Fi, Ethernet, VE.Direct, USB and BMS-Can connections. When connected to the internet, the system can be monitored and managed remotely through the Victron Remote Management portal.

Key Features:

• Combines an inverter/charger, MPPT solar controller and GX monitoring hub in one enclosure
• Designed for 48V battery systems
• 3000VA inverter with 2400W continuous output at 77°F
• 5500W peak inverter power for starting demanding loads
• 230V AC pure sine-wave output with adjustable 50Hz or 60Hz frequency
• 35A AC battery charger
• 32A automatic AC transfer switch
• SmartSolar MPPT 250/70 charge controller with up to 70A of solar charging current
• Supports up to 4000W of PV power on a 48V battery system
• Maximum PV open-circuit voltage of 250V DC
• PowerControl helps prevent overloading a limited AC source
• PowerAssist supplements an AC source with battery power when additional power is required
• Integrated GX device with a two-line display
• Built-in Wi-Fi and Ethernet for local and remote monitoring
• Compatible with the Victron Remote Management portal
• BMS-Can connection for compatible managed batteries
• Supports off-grid, backup and properly configured energy-storage applications
• Programmable relay for alarms, low-battery signals or generator start and stop control

The EasySolar-II GX provides a centralized solution for residential solar systems, remote properties, backup-power installations and other applications requiring inverter power, battery charging, solar charging and system monitoring. The integrated components are prewired to communicate with each other, reducing installation complexity while retaining the flexibility of the Victron ecosystem.

Please Note: This is a 230V AC model. System design, PV string voltage, battery compatibility, grid settings, overcurrent protection and installation must comply with the applicable electrical requirements. The BMS-Can port is intended for compatible managed batteries and is not a general-purpose VE.Can port.

Technical Specifications: